![]() But if any wax gets trapped under the barrier these coatings create it will turn yellow over time, so be sure they’re initially applied to clean, bare glass. ![]() This stuff can make old gel coat look new again, for sure. ![]() Never apply a polymer or acrylic coating (like Rejex or Poli Glow) over of a waxed hull.(Stay away from trees, of course, since they tend to drop leaves and twigs all over the deck.) Remember, UV light degrades and destroys the wax faster than just about anything else, so parking next to a building or tall fence and minimizing direct sunlight will extend the effective lifetime of your latest wax job. If you store your boat on a trailer, try to park it in a shaded area.If you don’t replace it, oxidation will quickly set in. But that acid will also melt your protective coating of wax right off of the fiberglass. Many of those strong cleaners or strippers contain acid, to erase rust streaks and other tough stains. Throughout the season, if you spot some staining and need to use a dedicated hull cleaner or soap with strong de-greasers, immediately re-wax the gel coat.Otherwise, that grit will chew right through your wax job. Warning: start this wash-down with a thorough blast from the hose, and make sure all that nasty road grime gets sluiced away before you start scrubbing. If you trailer your boat, after a trip down the road give the hullsides a wash-down with a soap containing some gentle de-greasers (citrus-based ones, like Star brite Super Orange, are ideal).Let it remain dull, and it’ll detract from the boat’s overall looks. Get some metal polish and make it shine, and it’ll help set off the hullside’s mirror-like finish. Take the same attitude with chrome, stainless-steel, and brightwork.Either way, providing contrast for the gel coat makes the hull look even shinier. On the flip side, white rub rails really stand out when they shine along colored hullsides. The black rubber looks dull if you ignore it, but a wipe-down with automotive tire cleaner will make the rubber’s blackness deep and rich. These crystals can magnify the sun's rays, and UV light is the number-one enemy of wax-so leaving salt behind will rapidly speed up the wax’s break-down. Otherwise, when the saltwater dries it leaves crystals behind. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |